Did The Ghosting Appeared on Your Sublimation Paper when you Transfer ?----- Come on And Read How to Solve It !

  Hi, Nice to see you.  This week I went to the playground and experienced the roller coaster, It was so excited.Okay, back to the topic. Most of you read my article before must know that we are a professional sublimation printing and transferring material manufacturer in China and we have 10 years experience in this industrial now. So we must know a lot problems about the printing and transferring in your daily lives. Today I will discuss a problem about the ghosting on your fabric  or sublimation transfer paper when you transfer the patterns and give you some tips about how to solve it.
  Firstly, The sublimation transfer paper is transferred in tablet press, sometimes produce ghosting, the reason is: When comparing thermal transfer paper flat, not curved at a press heated immediately, paper and fabric can be posted flat . When thermal hot plate in an instant lift, paper and fabric can be adsorbed on the plate together, then falling down. At this temperature transfer paper falling to the fabric will have a displacement of the secondary transfer, the formation of a color very light ghosting.

   Then in order not to produce ghosting, you can take the following solutions:
1.Reduce the rate of increase.
  We can adjust the cylinders (or cylinder) on the flat heat transfer press speed control valve (throttle valve or throttle), the control valve off a small plate to lift a little, so that the platen lift slows down, When this plate is not easily lift the dye sublimation paper and cloth together sucked up, so to avoid falling fall of the secondary transfer ghosting problems.

2.Corners dipped in water law. 
If the sublimation transfer paper is smaller than the fabric, you can not print the pattern transfer paper coated with a little water to the four corners (a small point, ≤0.5 cm) is then covered in the fabric of the transfer, at the time of transfer dampened places and fabric bonding, after the transfer will not work with fabrics dislocation secondary transfer of ghosting. Place after the transfer point of water if the fabric has burnt yellow, can be erased with water.

3.Overlay.
If the transfer sheet is larger than the fabric, you can cover the fabric surface, then the paper and fabric generally will not be sucked up hot plates, this is because the physical reason being sucked from the electrostatic fabric, fabric cut off when the paper covering the fabric static role, it will not suck up and fell off the secondary transfer.

4.With special adhesive transfers.
The best way to avoid the ghost is using special adhesive sublimation paper, transfer paper when transferring viscous pasted together with the fabric, so that regardless of paper and fabric sucked up and fall, paper and fabric are always posted together, eliminate the possibility of shifting ghosting, using sticky sublimation paper can greatly improve the passing rate of operating convenience and mass production.

  Okay, These all above is my suggestion about the ghosting in the sublimation transfer paper. Of course if you have any need or questions welcome to contact us at any time. We will provide you with the best quality products and service. Thank you for your reading.




Nanjing Feiyue paper Industrial Co.,ltd
www.heatsub.com
Skype:+8618752006819
Whatsapp:+8618752006819

评论

此博客中的热门博文

Do You Know The Difference Between The Sublimation Paper And Heat Transfer Paper?

Which is The Right Printing Side of The Sublimation Paper and How to Distinguish it?

What’s the Difference Between Sticky Sublimation Transfer Paper And Sublimation Paper?