How to Preserve Sublimation Heat Transfer Paper Before It Printed? What Kind Environment is Suitable for It?

Hello, nice to see you again, my dear friends! Today's topic is about sublimation heat transfer paper. Do you know how to preserve heat transfer paper before it printed. And what kind environment suitable sublimation paper? Reading and following I will share you something about it.

Sublimation transfer printing machine heat transfer paper printing environment and preservation methods

A) The humidity in the printing environment is best controlled at 45 -- 70%RH. If the air is too dry, it is easy to warp the transfer paper. At this point, when the ink is sprayed, the transfer paper will absorb water to stretch and arch may cause friction nozzle failure. If the air is too humid will cause drying rate drop and transfer paper elongation at both ends. Please install and enable air conditioning in the inkjet printing room. Only stable inkjet printing can be achieved under stable environmental conditions. If do not have air conditioning for a while constant temperature is constant wet, remedial method is to be in before printing 1-2 days strip off transfer printing paper plastic bag to let transfer printing paper exposed in the air breath, balance transfer printing paper in the water, the purpose of doing so is to make transfer printing paper absorb moisture and pre-elongate, in order to avoid drying transfer printing paper overabsorb printing ink and elongate.

B) When the environment humidity is very large, transfer paper on both sides of the base paper layer may be due to suction uneven lead to inconsistent about elongation, in this case the printed strip design run partial or paper wrinkle, the remedy can be put in printer into the side and volume between horizontal a clean steel, the steel tube ends tied on the proper weight and keep before the transfer paper into the smooth and proper tension.

C) When the transfer paper absorbs too much moisture in the air, the paper will become very soft, which will make the transfer paper crease when it passes through the rubbing wheel.

D) The printing surface of the transfer paper should be confirmed. The printing surface of the transfer paper should be turned outward. When the printing surface cannot be confirmed, you can use your finger to touch water to smear the two sides of the transfer paper.

E) When placing transfer paper on the sublimation printer, wear fine cloth gloves to prevent smudges on the surface of transfer paper.

F) When changing a new volume, it is prudent to print a small standard color block (the standard color block refers to the pattern with four or six colors of CMYK that is familiar to users) and do the transfer printing test to ensure that the color of each roll is consistent. If there is obvious color difference, please find out the reason and rule out in time.

G) During the printing process, the test bar should be printed frequently to ensure the smoothness of the ink of the sprinkler head, make the pattern color consistent and accurate, and avoid printing defects due to partial blockage of the sprinkler head.

H) In the case of printing and winding at the same time, open the printer's built-in heater and set the appropriate temperature according to the amount of ink-jet printing pattern, or open the external air drying equipment. Ensure that the back of the roll will not be stained with color to avoid printing patterns.

Okay, these all above are my share about the methods of preserve sublimation paper. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.

Nanjing Feiyue paper Industrial Co.,ltd
www.feiyuepaper.com
Email: sales@feiyuepaper.com
jenny@feiyuepaper.com
Whatsapp: +8618755150383